Three Phase 16A 32A IEC 62196-2 Type 2 Socket Outlet For EV Charger Station
Product Description:
Type 2 inlet socket (Station side), 32A, 480V, 3-phase. is intended for installation in the vehicle side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller. The socket complies a high-quality insulating thermoplastic coating that provides IP65 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw.
Product Specification:
Vehicle connector type | Type 2 female socket - IEC 62196-2 |
Operation voltage | 250/415V |
IP class | IP55 |
Rated current | 16A,32A,63A |
Contact Resistance | 0.5m ohm Max |
Contact Pin | Copper Alloy, Silver or Nickel Plating |
Operating temperature | -30℃ to +50℃ |
Key Features:
IP55 Rated Working Condition
Unique Integrated Design
Self-Cleaning Function on Pins
Mounted on the side of the vehicle.
High strength flame retardant nylon
Pin Material: Copper Alloy Silver Plating
Better Conductivity and Higher Energy Transmission
Excellent protection performance resistance to vibration, moisture, dust, and salt spray.
The socket is equipped with resistance sensors that automatically switch off when the temperature rises above a safe limit.
Insulator in flammability UL94 V-0 (It is equipped with a UL94 V-0 approved fire isolator that stops the spread of fire within 10 seconds)
Type 2 charging socket meet 62196-2:2010 sheet 2-iia
Comply to EN 62196-1: 2014; EN 62196-2:2017; TUV CE Standards.
Universally compatible, high-quality IEC 62196 type 2 ev charging outlet designed for 10,000+ charging cycles
FAQ:
Q1. What about the lead time?
A: 10-15 days for mass production.
Q2. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 7-10 days to arrive. Airline and sea shipping also optional.
Q3. How to proceed an order for EV charging cables?
A: 1) let us know your requirements or application.
2) We quote according to your requirements or our suggestions.
3) Customer confirms the samples and places deposit for formal order.
4) We arrange the production.
Q4. Is it OK to print my logo on the products?
A: Yes. Please inform us formally before our production.
Q5: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Q6: How to deal with the faulty?
A: 1)Our products are produced in strict quality control system and the defective rate will be less than 0.5%.
2)During the guarantee period, we will send new one with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Contact Us at Any Time